Tel:+86-0512-63419655   E-mail:ndt@desisengroup.com
/
/
/
SUZHOU DESISEN
ELECTRONICS CO., LTD.
Home / Products / Sorting Machine
Product Category

Get In Touch

Tel: +86-0512- 63419655
Phone: +86-13616209379
Fax: 0512-63459655
Email: ndt@desisengroup.com

Contact Us

Sorting Machine

The eddy current sorting machine can detect the crack, crack, tear and other defects of metal parts, as well as the separation of heat treatment mixture and hardness without heat treatment.Manual feeding or automatic feeding positioning can be adopted, through the PLC preset various types of detection parameters, output processing control signal, read the eddy current flaw detection system on the workpiece defect positioning alarm signal, and finally automatic control sorting machinery, the flow of eliminating the defect workpiece.

  • FET-II Eddy Current Hardness Testing Fastener Sorting Machine
    FET-II instrument is the product upgraded and updated from steel material nondestructive testing instrument of our company. The major part, with Intel 5p series single chip computer as the main data processing, signal, analysis and control, peripheral devices are COMS small and medium scale integrated circuit, which have the advantages of low functional consumption and strong anti-interference, etc. 
  • SGF-1B Automatic Eddy Current Hardness Testing Bolt Sorting Machine
    SGF-1B type instrument adopts imported electronic components, in order to improve the reliability, signal processing circuit fully adopts small and medium-sized analog and digital integrated circuit. It adopts a piece of circuit board to reduce internal wiring, shorten the signal transmission path to decline interference, alarm output plughole set at the rear panel of the machine, this interface provides the convenience for connecting automatic detection line, with functions of AC/DC, this machine has multi-purpose, applicable for steel mixture separation, error separation of heat treatment hardness, and apply for mixture separation and burnt quality nondestructive testing of the steel heat treatment state before and after processing, and the crack detection under certain conditions. 
  • ZGF-Ⅲ Eddy Current Automatic Screw Sorting Machine
    ZGF-Ⅲ Intelligent non-destructive separator adopts large screen LCD digital and large size of display tube. Display interface include: bar graph, cursor figure, waveform graph, digital display. Users can choose different display interfaces according to different separation project, makes the quality condition of the workpiece to be tested clearly shown on the LCD screen, users will operate the instrument more intuitively and simply.
  • ZGF-A Automatic Eddy Current Non Destructive Testing Sorting System
    ZGF-A Intelligent non-destructive separator adopts large screen LCD digital and large size of display tube. Display interface include: bar graph, cursor figure, waveform graph, digital display. Users can choose different display interfaces according to different separation project, makes the quality condition of the workpiece to be tested clearly shown on the LCD screen, users will operate the instrument more intuitively and simply.
  • ZGF-D Eddy Current Overheating Overburning Fastener Sorting Machine
    ZGF-D Intelligent steel overheating overburning nondestructive separator is the product upgraded and updated from steel material hardness nondestructive testing instrument. The major part, with Intel 5p series single chip computer as the main data processing, signal, analysis and control, peripheral devices are COMS small and medium scale integrated circuit, which have the advantages of low functional consumption and strong anti-interference, etc.  
  • ZGF-E Automatic Eddy Current Non Destructive Testing Sorting System
    ZGF-E Intelligent non-destructive separator adopts large screen LCD digital and large size of display tube. Display interface include: bar graph, cursor figure, waveform graph, digital display. Users can choose different display interfaces according to different separation project, makes the quality condition of the workpiece to be tested clearly shown on the LCD screen, users will operate the instrument more intuitively and simply.
  • ZGF-II Eddy Current Non Destructive Hardness Testing Sorting Machine
    ZGF-II instrument is the product upgraded and updated from steel material nondestructive testing instrument. The major part, with Intel 5p series single chip computer as the main data processing, signal, analysis and control, peripheral devices are COMS small and medium scale integrated circuit, which have the advantages of low functional consumption and strong anti-interference, etc.  
  • ETP-2X Automatic Crack Sorting Machine
    This system is specially designed for defect automatic detection of bearing roller bearing produced by bearing factory, which can also be used for nondestructive testing of magnetic or nonmagnetic metal parts of similar size. This system can work online or offline, which has advantages of high detection sensitivity, good automation degree, easy operation, with characteristics of automatic alarm and automatic separation, is the required nondestructive testing equipment of bearing factory. This system adopts the high stability of eddy current flaw detector, fixed balanced point probe, workpiece automatic spiral forward, can do 100% non-destructive inspection on workpiece surface.
  • SWT-3.5 Eddy Current Non Destructive Testing Sorting Machine
    SWT-636 Crack Separating Machine is an automatic eddy current testing equipment used for crack separating of all kinds of small workpiece, specially apply to 100% inspection of standard workpiece.
  • EHS-1X Automatic Eddy Current Hardness Testing Sorting Machine
    This system is available for
    1. This system is available for automatic hardness separation of iron casting, nodular cast iron, wear resisting cast iron and malleable cast iron (commonly known as malleable iron), hardness measurement of all kinds of iron casting after normalizing, annealing, quenching and tempering.
    2. Hardness measurement and separation of any normalizing and annealing steel, such as all kinds of thread rolling parts, gear, etc.
    3. Hardness separation of plumbing pipe fittings.

Get In Touch

Tel

+86-0512-63419655 / +86-13616209379
Email
ndt@desisengroup.com
Adress
Building 31, U TechnoPark, No 4168 Dongshan Avenue, Wuzhong District, Suzhou City, Jiangsu Province, China.

Quick Links

Product Links

Contact Us
©  2019 Suzhou Desisen Electronics Co., Ltd.  All rights reserved. Sitemap.