SWT-662 Double Channels Automatic Eddy Current Flaw Detector, it adopts full automatic electromechanical integration testing machine controlled by the latest eddy current technology 、microprocessor .the function is powerful, the operation is simple and intelligent ,high degree of automation . It adopts software written by WINDOWS operating platform make instrument operating easier and intelligent .the performance of instrument is stable and reliable , it is the ideal equipment of shot metal bar,metal accessory flaw detection ,hardness selection .
1.Applicable targets: shot metal bar flaw detector and hardness selection.
2.Double channels (it is equal to working efficiency of two independent machine ).
3.Testing frequency range: 100Hz ~ 2MHz Adjustable.
4.Specification dimension: ≧Ф0.5mm.
5.It can test more than 0.1MM deep flaw.
6.Supplying、 sorting 、counting automatically.
7. The speed of testing is one piece per second
8.Sample rate: 4 × 25000 times / second.
9.Gain amount: 0－70dB Adjustable.
10.Phase position: 0-360 degrees can be adjusted arbitrarily, and the frequency range is 1 degree.
11.It adopts industry controlling computer ,WINDOWS operating platform flaw detection software.
12.There is no damage after sorting.
1. Channel: 2.
2. Frequency: multiple groups.
3. The speed of flaw detection: ≤ 350m / min (6m / s).
4.Frequency range: 100 Hz ~ 2 MHz.
5.Gain: 0-70db, step size: 0.5dB.
6.Phase rotation: 0 ~ 360 ° step 1 °.
7. Ratio of gains (Y / x): 0.1 ~ 10.
8.Gains /phase position test :manual and automatic.
9.Showing model :spot line blanking.
10.High -pass filtering: high / medium / low.
11. Digital filtering spots: 1 ~ 100.
12. Working model :inside outside clock.
13. Probe excitation signal amplitude: 1-8v.
Saving temperature ：-20~60℃
Relative humidity: not exceed eighty-five percent
a corner of flaw detection: