Tel:+86-0512-63419655   E-mail:ndt@desisengroup.com
/
/
/
SUZHOU DESISEN
ELECTRONICS CO., LTD.
Home / Products / Automatic Flaw Detector / SWT-604 Automatic Eddy Current Flaw Detector for Sale
Product Category

Get In Touch

Tel: +86-0512- 63419655
Phone: +86-13616209379
Fax: 0512-63459655
Email: ndt@desisengroup.com

Contact Us
Share to:

SWT-604 Automatic Eddy Current Flaw Detector for Sale

SWT-604 type full automatic eddy current flaw detector is a four frequency and four channel digital eddy current flaw detector which combined with light electric and mechanical,using translation method to send workpiece to inspection area,it can detect flaw in metal accessory both inside and outside and surface.it is set with administrator mode and working mode so as to be manage easily.the whole equipment is composed of main control system and supply system and mechanical transfer system . Full closure type main control box , opening type aluminum alloy transfer device, kind of humanization interface,it is specially suitable for 100 percent flaw detection on metal accessories.

  • SWT-604

Product Description

Instrument introduction:




SWT-604 Automatic Eddy Current Flaw Detector for Sale is a four frequency and four channel digital eddy current flaw detector which combined with light electric and mechanical,using translation method to send workpiece to inspection area,it can detect flaw in metal accessory  both inside and outside and surface.it is set with  administrator mode and working mode so as to be manage easily.the whole equipment is composed of main control system and supply system and mechanical transfer system . Full closure type main control box , opening type aluminum alloy transfer  device, kind of humanization interface,it is specially suitable for 100 percent flaw detection on metal accessories.


The trait of function: 





1.It adopts four frequency and four channels to work.

2.Testing surface is inside、outside and end face.

3.The speed of testing is two seconds per workpiece.

4.Supplying 、sorting、counting automatically. 

5.There is no damage on accessory after detecting.

6.No need to demagnetize and wash.

7.Count up the number of detected workpiece 、qualified products 、the percent of pass.


Instrument Parameter:



1.Detecting 0.05MM deep flaw.

2.Equipment noise <60db, power consumption <500W(220V).

3.The range of frequency:64Hz-10MHz  (set arbitrary).

4.Gain : 0-70db,stepping is 0.1db.

5.Phase position :0-360°、stepping is 1°.


Working environment:




Working temperature:-15~55℃

Saving temperature :-20~60℃

Relative humidity: not exceed eighty-five percent

Working voltage:AC220±10V


a corner of flaw detection:

SWT-604-1

a corner of flaw detection:

SWT-604-2

Get In Touch

Tel

+86-0512-63419655 / +86-13616209379
Email
ndt@desisengroup.com
Adress
Building 31, U TechnoPark, No 4168 Dongshan Avenue, Wuzhong District, Suzhou City, Jiangsu Province, China.

Quick Links

Product Links

Contact Us
©  2019 Suzhou Desisen Electronics Co., Ltd.  All rights reserved. Sitemap.