Tel:+86-0512-63419655   E-mail:ndt@desisengroup.com
/
/
/
SUZHOU DESISEN
ELECTRONICS CO., LTD.
Home / Products / Automatic Flaw Detector / STY-2 Double Lines Four Channels Eddy Current Flaw Detector
Product Category

Get In Touch

Tel: +86-0512- 63419655
Phone: +86-13616209379
Fax: 0512-63459655
Email: ndt@desisengroup.com

Contact Us
Share to:

STY-2 Double Lines Four Channels Eddy Current Flaw Detector

Due to ferromagnetic substance can sences certain current value in alternating magneticfield.ourprobe sends a uniform magnetic field to identical specification with different hardness and workpiece with flaw on the surface will sence different current value ,STY-2type double line hardness、flaw detector nondestructive sorting machine sense current value in probe from identical specification standard exemplar and compare then display on the screen by magnetic flux by measuring induced current in probe of identical diminsion workpiece and identical specification standard exemplar so as to distinguish the advantages and disadvantages of hardness flaw of detected identical specification workpiece.

  • STY-2

Product Description

Instrument profile:




Due to ferromagnetic substance can sences certain current value in alternating magneticfield.ourprobe sends a uniform magnetic field to identical specification with different hardness and workpiece with flaw on the surface will sence different current value ,STY-2 Double Lines Four Channels Eddy Current Flaw Detector sense current value in probe from identical specification standard exemplar and compare then display on the screen by magnetic flux by measuring induced current in probe of identical diminsion  workpiece and identical specification standard exemplar so as to distinguish the advantages and disadvantages of hardness flaw of detected identical specification workpiece.


The traits of function: 





1.Nondestructive detection, there is no damage left on the surface of workpiece,avoid traditional solution from destroying detection.  

2. It it suitable for a lot of state of workpiece surface and shape,normally it has no special requirement on the surface of workpiece. 

3.The instrument adopts the electromagnetic induction principle ,taking advantage of detected workpiece and standard exemplar to detect the quality of workpieces.

4. One machine with multifunction.instrument will detect workpiece after hardness detecting on workpieces,, when hardness detecting there are some unqualified products then it will not do flaw detection. 

5.When detected workpiece are qualified and unqualified,the machine will take them out to different transfer pathway. manually.

6.The instrument can count on products respectively on detected products of every channel.

7.The instrument possesses history memory,so it can search time state of detected products.

8.The main control machine of sorting machine uses dynamic display of dot figure detected  magnetic flux, wherever the dot figure on,the results of detecting will be displayed on the computer.

9.The main control instrument of sorting machine equipped with upper limit and lower limit of hardness and flaw detection,when the dot figure cursor is located in some area then give relative instruction.

10.The instrument has data analysis function ,and do data analysis on detected workpiece and be showed by the form of curvelets.

11.Instrument operating is simple .detecting speed is fast ,double lines one hour and exclude manual time is 800-900pieces one hour. 

12.Do 100%detection on workpiece,satisfying a mount of detecting workpiece,and avoid unqualified products outflow from sampling.

13.It just need change relative probe to detect different workpiece so as to satisfy detecting needs.

14.The surface stats of detected workpiece is the same with identical diminsion、it also allowed certain maching error ,however,the maching error can not exceed relative standard.


Instrument Parameter:



1.Detecting target :every kind of flaw and hardness of accessoried of magneto conductive material.

2.Excitation frequency :multiple.

3.Excitation power: 0~100W.

4.Amplifier gain: 0~60db.

5.Displaying ways:Square fluorescence oscilloscope tube.

6.Detecting speed: 2500-3000 pieces / hour.

7.Geometric dimension:100mm×650mm×900mm(length×width×height)(customized).

8.Power souce: 220V±10% 50Hz.


Working environment:




Working temperature:-15~55℃

Saving temperature :-20~60℃

Relative humidity: not exceed eighty-five percent

Working voltage:AC220±10V


A view of flaw detection:

STY-2-1

A view of flaw detection:

STY-2-2


Get In Touch

Tel

+86-0512-63419655 / +86-13616209379
Email
ndt@desisengroup.com
Adress
Building 31, U TechnoPark, No 4168 Dongshan Avenue, Wuzhong District, Suzhou City, Jiangsu Province, China.

Quick Links

Product Links

Contact Us
©  2019 Suzhou Desisen Electronics Co., Ltd.  All rights reserved. Sitemap.