FET-5.5 is an eddy current flaw detector with double sensors input, double channel. Each sensor input has an individual testing channel. It can connect the rotating type sensor, probe type sensor suitable for arranging on the automatic or semi-automatic eddy current flaw detector to test. Eddy current nondestructive testing inspection systems by DSS can configure systems for portable, stand-alone use or integration into your production line. Please have a look at the eddy current NDT equipment we have on offer and call us to discuss your requirements.
Eddy current flaw detector allows you to easily access on-device workflow applications that efficiently guide the inspector while capturing electromagnetic (eddy current) inspection data. Real-time collaboration with remote experts allows fast and accurate indication confirmation. No more stacks of paperwork or questionable inspection calls, just easy and efficient nondestructive testing for weld, aerospace (including rotary), and general-purpose inspections.
Customize on-device workflow applications
● Easily readable touchscreen display that works while wearing gloves
● Instantly connect with other experts
● Base your next steps on real-time readings
● Immediately access your service bulletins
● Easily download software upgrades
● Probes for all inspections
FET-5.5 is an eddy current flaw detector with double sensors input, double channel. Each sensor input has an individual testing channel. It can connect the rotating type sensor, probe type sensor suitable for arranging on the automatic or semi-automatic eddy current flaw detector to test. Eddy current nondestructive testing inspection systems by DSS can configure systems for portable, stand-alone use or integration into your production line.
1.double probes、double frequency or single probe、single frequency.
2.each testing channel/testing frequency has different warning output.
3.it can deploy probe connection (bridge type、 reflection、absolute).
4.support rotated probe drive.
5.smoothing range is wide,suitable for dynamic testing.
6.Flexible I/O interface connects to process controller.
7.user interface with multiple language.
8.setting and signal tracking can be saved.
9.computer software,used for transferring testing setting and result to computer.
1.Explore surface flaw of production component.
2.Conduct heat treatment classification with probe.
3.Using fixed probe to detect rotated iron or nonferrous metal rod and tube.
4.Using fixed probe to detect welding zone of iron or nonferrous metal welding pipe.
5.Thread examination and other testing piece feature examination.
1.Display color display,with CCFT backlight ,the color in each channel is optional.
2.Frequency range :50HZ-10MHZ.
3.Low pass filter :20Hz-5KHz.
4.High pass filter ,all-pass、supernormal0.01Hz to 0.5Hz,normally 10Hz to 2KHz.
5.Channel/probe ,each unit has two,it can support multiple devices synchronous working by alternative synchronization devices.
6.Every channel is independent alarm,it can choose alarm way are phase、amplitude or strobe frame alarm.
7.Duration of alarm is from 50ms to 10 seconds.
8.Alarm delayed menu is optional.
9.Balanced mark each probe independence or joint mark,before operation ,panel is independent.
10.Trace recording/playback trace inner record up to 30 seconds.
11.Built in relay alternating current or direct current relay,when ordering ,choose specification,on the back panel,it provides relay Amphenol connector, matching pieces are provided as attachments.
12.Analog output is independent and optional.
13.synchronous inputs passes back panel RJ45 connector.
14.Automatically power on,users can realize power on operation by inner net.
Saving temperature ：-20~60℃
Relative humidity: not exceed 85%