China Eddy Current Flaw Detector by DSS is suitable for inspecting metallic parts accurately. They are capable of detecting surface and near-surface defects with a high level of precision. DSS offers a full range of eddy current inspection equipment to serve a wide range of industrial applications. The China Eddy Current Flaw Detector probes produce magnetic fields that induce current, which flows in the test piece, impacting the magnetic field, magnitude, and phase of the coil voltage. The China Eddy Current Flaw Detector is popularly used for applications like detecting surface and near-surface defects, alloy sorting, and the inspection of bolt holes.
China Eddy Current Flaw Detector is one of the most effective electromagnetic testing methods used in NDT, making use of electromagnetic induction to detect and characterize surface and sub-surface flaws in conductive materials. By using China Eddy Current Flaw Detector, large areas can be examined very quickly without the requirement of coupling liquids. Apart from finding cracks, China Eddy Current Flaw Detector can also be used to check metal hardness and conductivity in applications where those properties are suitable.
Features of China Eddy Current Flaw Detector
● Designed to meet the requirements of IP66 and EN-15548
● Long battery life (up to 10 hours)
● Bright, 5.7in (14.5cm) VGA display with full-screen mode
● Improved filters for rotary scanner mode
● Intuitive interface with application selection presets
● All-settings configuration page
● 10Hz to 12MHz frequency capacity
● Automatic internal balancing (BNC connector)
● Up to two real-time readings
● True automatic mixing
● Storage capacity of up to 500 files (program and data)
● On-board file preview
● For More Information, Please Click Here
1.Automatically record displayed the number of flaws and its position.
2.Dynamic fixed length marking control.
3.Synchronous internal external clock control.
4.The strength of probe is changeable.
5.High accuracy end socket signal removal function.
6.High accuracy real time and delayed alarm output.
7.Nonamplitude phase position/amplitude alarm regional.
8.Quickly figure/analog electronic balance.
9. Background coordinates solution of Rectangular coordinate system and Polar coordinate system.
10.Possessing memory track delayed blanking function.
11.Saving amount of many kinds of detecting results of detecting procedure、data、diagram.
12.Broadband digital filter as well as intelligent dynamic procedure filter.
13.The function of automatic signal amplitude、phase position measurement and eddy current detecting signal playback extend analysis.
14.Single trace impedance plan diagram map as well as two time base scanning rolling display.
15.Automatically form detecting reports(including detecting length、the number of flaws and the position of every flaw).
16.Menu type man-computer dialogue,keyboard operating online help.
2.Frequency : multiple.
3.Flaw detecting speed : lower than 360meter per minute.
4.The range of frequency : 64Hz~ 4 MHz.
5.Gain : 0-90db,stepping is 0.5dB.
6.Phase position rotation : 0 ~ 360 ° step 1 °.
7.8、Ratio of gains （Y/X）: 0.1~10.
8.Gain /phase position measurement :manual /automatic.
9.Displayed mode : spot/line/blanking.
10.High pass filter : high /medium/low.
11.Digital filter points: 1 ~ 100.
12.End socket delayed: 0-32s.
13.Delayed marking time: 0-200s.
14.Marking time: 1-32s.
15.Working mode:internal /external.
16.Probe excitation signal amplitude: 1-8V.
17.Hardware alarm output: 8set.
18.Alarm output signal: audio OC gate output.
19.A Encoding plate input signal: switching signal.
20.The type of printer: stylus printer.
Saving temperature ：-20~60℃
Relative humidity： not exceed 85%