Tel:+86-0512-63419655   E-mail:ndt@desisengroup.com
/
/
/
SUZHOU DESISEN
ELECTRONICS CO., LTD.
24 Years Production Experience
Preferred Flaw Detector For Enterprise
●  Light and portable flaw detector             
●  Flaw detector with high speed to detect
●  Fully automated testing flaw detector    

Accurate Flaw Detector

Product Categories

Vortex Flaw Detector

Intelligent digital eddy current flaw detector is suitable for online and offline detection of metal tubes、bars、wire rods、such as steel pipes、steel rods、electromagnetic wire 、copper wire、aluminum wire and other metal parts,it can apply to automatic detection of mechanic accessories ,equipped with relatively independent detecting channels so it can drive combined probes formed by absolute and differential coil.
 

Automatic Flaw Detector

Intelligent digital eddy current flaw detector is suitable for online and offline detection of metal tubes、bars、wire rods、such as steel pipes、steel rods、electromagnetic wire 、copper wire、aluminum wire and other metal parts,it can apply to automatic detection of mechanic accessories ,equipped with relatively independent detecting channels so it can drive combined probes formed by absolute and differential coil.
 

Sorting Machine

The eddy current sorting machine can detect the crack, crack, tear and other defects of metal parts, as well as the separation of heat treatment mixture and hardness without heat treatment.Manual feeding or automatic feeding positioning can be adopted, through the PLC preset various types of detection parameters, output processing control signal, read the eddy current flaw detection system on the workpiece defect positioning alarm signal, and finally automatic control sorting machinery, the flow of eliminating the defect workpiece.

Conductivity Meter

The conductivity meter can detect the conductivity and resistivity of nonferrous materials.
Check the heat treatment status during production and check the overheating damage under service conditions (e.g., aircraft) 
Test material grade
Classification of metal
Measure the density of powder metallurgy parts

 

Ultrasonic  Flaw Detector

Ultrasonic testing is the use of ultrasound can penetrate into the depths of the metal materials, and consists of a section into another section, on the edge of the interface reflection characteristics of flaws, a method to check the parts when the ultrasonic beam from the surface by the probe through the metal parts inside, encountered defects with parts respectively when bottom reflection wave, formation of pulse waveform on the screen, according to the pulse waveform to judge the defect position and size.
Scientific Solutions
Application
X Ray Detector
X Ray Detector
Suzhou Desisen Electronics
— Company Profile
The products are wildly applied to electric power ,nuclear energy, aerospace , defence industry,metallurgy,mechanical manufacturing. A lot of breakthrough has been made in these years,and be the first one to generalize multi-functional intelligent eddy current detector,multi-frequency multi-channel eddy current detector,double frequency double channel eddy current detector, tubes and rods automatic testing system,aircraft wheel automatic testing system.

Our company and many academies、institutes has developed high speed detector and an online eddy current detector which can up to 3200m per minute by working together which fill the vacancy of china , so it is strongly promote Chinese development of detecting career.
0
Set Up
Time
0
+
Number Of
Workers
0
Cooperation
International
0
+
Satisfied
Number
Clientele
Our Partners
Industry Information
Blogs
  • September,23, 2020
    Five Common Flaw Detection Methods

    The five conventional methods are radiographic testing, ultrasonic testing, magnetic particle testing, eddy current testing, and penetrating testing.1. Radiographic testing methodRadiographic flaw detection is a method of flaw detection using the transparency and linearity of the ray. Although these

  • September,10, 2020
    Eddy Current Flaw Detector is Suitable for Maintenance Inspection

    The eddy current flaw detector supports any eddy current: parametric, differential, dynamic (rotating) converter, and various impedance converters. The flaw detector is designed to control metal products and carbon fiber composite materials to determine whether there are defects such as surface and

  • August,26, 2020
    Factors Affecting the Results of Eddy Current Testing Machine

    Eddy current flaw detection is a non-destructive flaw detection technology that uses AC electromagnetic coils to induce eddy current on the surface of metal components. It is suitable for defect detection of conductive materials, including ferromagnetic and non-ferromagnetic metal materials. Due to

  • September,03, 2020
    What is an Eddy Current Flaw Detector

    Eddy current flaw detectors are often used in the field or on-site of the military, aviation, railway, industrial and mining enterprises. They are multifunctional, practical, and high-performance/price ratio instruments. They have many years of experience in manufacturing eddy current detectors to m

  • August,19, 2020
    Maintenance Skills of Eddy Current Flaw Detector

    Eddy current flaw detectors are generally used for non-destructive testing. It is specially used for quality inspection of ship hulls, pipelines, high-pressure vessels, boilers, airplanes, vehicles, bridge materials, parts processing, welding quality, various light metals, rubber, ceramics, and othe

  • August,13, 2020
    Advantages of Digital Ultrasonic Flaw Detector

    The digital ultrasonic flaw detector has the following advantages:1. Fast detection speedGenerally, digital ultrasonic flaw detectors can automatically detect, test, and keep what they see and hear, and some can actively create depth compensation and automatically deploy sensitivity, so the detectio

  • June,29, 2020
    Features of Non Destructive Testing Equipment

    Non-destructiveNon-destructive means that when the test results are obtained, except for rejecting unqualified products, no parts are lost. Therefore, the scale of inspection is not limited by the number of parts. It can be used for sampling inspection and general inspection when necessary. Therefor

  • January,10, 2020
    Train B ultrasonic woman doctor

    【definition】 Doctors do B ultrasonic to patients,detecting workers are equal to do B ultrasonic to train。Their work is to see inside of steel rail by flaw detector so as to detect these flaws or cracks that are invisible by eyes.Liuzhou Guangxi“train B ultrasonic female doctor ”has been insisting on

  • January,10, 2020
    What is differenct between electric pulse width and sound pulse width?

    Not only《the properties and detection of nondestructive testing ultrasonic device》 but also 《ultrasonic detection》are not differentiate, or some theses,define them as “pulse width”,de-emphasize their difference and casual relationship,and not explain harm of confusing ,this article puts forward

  • January,10, 2020
    Suzhou ultrasonic flaw detector manufacturer aims at difference between "scanning"and"examining"

    The difference of “examining” and “scanning”in ultrasonic flaw detector“examine”and ”scanning ”are two common easily to understand terms,but writer thinks:there are some questions we should discuss .The definition of examining is move probe and makes sound beam covered volume of workpiece that neede

Get In Touch

Tel

+86-0512-63419655 / +86-13616209379
Email
ndt@desisengroup.com
Adress
Building 31, U TechnoPark, No 4168 Dongshan Avenue, Wuzhong District, Suzhou City, Jiangsu Province, China.

Quick Links

Product Links

Contact Us
©  2019 Suzhou Desisen Electronics Co., Ltd.  All rights reserved. Sitemap.